Great photos and video edit from Xander and Benj Raith.
Photo : Benj Raith
Rail or Kicker, Watch the video and decide for yourself.
Links
Information
Categories
Meta
Raith Brothers Productions
KiteForum- Kitesurfing • Re: High Pressure kite by Bruno Legaignouxspritrig wrote: ↑Sun Dec 16, 2018 9:40 pmAh yes. There are single line kites like that! Focus on kiteboarding has gotten me out of flying single line kites which have a lot more diversity of designs. I forgot from my single line days. https://prismkites.com/product/eo-atom/Kitexpert, how stiff are foil kites? Do they fold at the edge […]
- Kitesurfing • Re: North Dice 2018 unhook issuesHello,Yes lines checked, I just think the 2016 had a much wider sweet spot, at the expense of lift which the 2018 , generates much more. The 2018 is a bit higher aspect ration that 2016 soit lifts more and has improved hangtime...Statistics: Posted by flipper231 — Mon Dec 17, 2018 2:32 am
- Kitesurfing • Re: Any news from Woo HQ ?So they are still improving their products, this is great !However still no answer from Woo HQ ...it drives me crazy -_-Statistics: Posted by touffegong — Mon Dec 17, 2018 12:37 am
- Hydrofoil • Re: Foil Board rail protectionMitaka wrote: ↑Sun Dec 16, 2018 10:52 pmI use clear polyurethane tape. Holds great for more than 2 years and does great job in protecting my rails.Many Thanks. I found some polyurethane Helicopter tape that should work well. It should be able to hold up. Looks like some of the bike frame high Impact protective […]
- Kitesurfing • Re: teaching alone in the USSouth Padre Island TX goes off all winter. Temps swing from cold to hot on a weekly basis.Statistics: Posted by ProkiteSouthPadre — Mon Dec 17, 2018 12:17 am
- Kitesurfing • Re: 3rd part bladders for a Wainman Punch 10.5 RAFk2thiago wrote: ↑Sun Dec 16, 2018 10:40 pmGTC wrote: ↑Sun Dec 16, 2018 9:00 pmI had the same issues with a Smoke 9 leading edge and a Mr Green 7.5 strut. The valves are the weak points of these kites.I opted for replacing the LE valve with a new one (about 12€ in Ebay). As […]
- Hydrofoil • Re: KTA Asia Pacific Hydrofoil Series Malaysia - Final Dayap888 wrote: ↑Sun Dec 16, 2018 10:56 pmToby you are Foiling now ? Airstyle for lifeStatistics: Posted by Toby — Sun Dec 16, 2018 11:21 pm
- Kitesurfing • Re: 3rd part bladders for a Wainman Punch 10.5 RAFIf its just the valves leaking then get some aquaseal marine sealant. If you can remove the valves with heat and clean the bladder would be best. Once you aquaseal it then that part will never come off again.I think if you seartch this forum you will get some pictures and more info about this […]
- Hydrofoil • Re: Neil Pryde Glide Reports/Reviews?I attach her to my harness with a waist harness and snap shackles. Once attached, we do a normal water start. It's important that she bends her knees to get going. In light winds, I also need to loop the kite. Together with wet gear, we weigh well over 300 lbs. But the foil doesn't […]
- Hydrofoil • Re: KTA Asia Pacific Hydrofoil Series Malaysia - Final DayToby you are Foiling now ? Statistics: Posted by ap888 — Sun Dec 16, 2018 10:56 pm
- Kitesurfing • Re: High Pressure kite by Bruno Legaignoux